High Lift & Vertical Lift Conversion in Denver, CO

High Lift & Vertical Lift Conversion in Denver

A high lift or vertical lift conversion changes how your garage door moves along its tracks. In a standard setup, the door rolls horizontally across the ceiling once it clears the opening. High lift conversion extends the vertical track section, so the door travels higher before curving into the horizontal portion. Vertical lift conversion removes the horizontal section entirely—the door goes straight up, parallel to the garage wall. This work requires replacing the existing track system, installing new curved or straight vertical track sections, and reconfiguring the torsion springs, cables, and drums to handle the altered weight distribution. The drums must be swapped for ones with different cable groove diameters, and the spring tension recalculated to match the new lift height. It is not a simple adjustment; it involves removing the old tracks, mounting new brackets, and carefully aligning everything so the door moves smoothly without binding. For Denver properties, this conversion is most often requested by homeowners who want to regain ceiling space for storage, park a lifted truck or SUV, or accommodate a car lift inside the garage. Older Denver homes, particularly in neighborhoods like Alamo Placita or Arapahoe Square, often have low headroom—standard tracks eat into available vertical space. A high lift conversion frees up that area by pushing the door higher, giving you room for overhead shelving or a taller vehicle. In newer constructions with high ceilings, a vertical lift conversion eliminates the horizontal track entirely, allowing the door to sit flush against the wall when fully open—ideal for workshops or garages where every inch of depth matters.

The process begins with a on-site measurement of your garage’s headroom, sideroom, and backroom clearance. The technician then removes the old tracks, springs, and cables. New vertical or high-lift tracks are cut to length and secured to the wall or ceiling joists with heavy-duty brackets. The torsion spring assembly is replaced or re-tensioned to handle the door’s new travel path. Cables are re-routed over the new drums and adjusted to ensure even lifting. Finally, the door is cycled several times to check for balance, binding, and proper sealing against the weatherstripping. Safety cables are installed where required, and the opener limits are reset. For Denver garages with limited side room, the track layout may need custom bending to fit tight corners. This conversion is not for every door—heavy wood or steel doors may require additional reinforcement or a stronger opener. But for those who need to park a tall vehicle or maximize storage, it is a permanent solution that transforms the garage’s usable space.

Areas We Cover in Denver

We provide high lift and vertical lift conversion service across Denver and its surrounding neighborhoods, including Abbey, Adonea, Alamo Placita, Arapahoe Square, Arista, and Arrowhead. Our technicians are familiar with the varying garage layouts found near landmarks like the (closed) 10 Barrel Brewing Company on Walnut Street, the #Vybe venue in RiNo, $1.26/scoop at the local ice cream shop, and $3.99 Cleaners on Colfax. Whether your home is in a historic district with low ceilings or a newer development with tall garages, we travel to you with the tools and materials needed for the job.

What to Expect

Expect a full assessment of your garage’s dimensions before any work begins. The technician will measure headroom, sideroom, and backroom to determine what lift configuration fits your space. The conversion process takes several hours—plan for the garage to be unusable during that time. Noise and dust are normal as old tracks are removed and new ones are fastened. After installation, the door will travel higher than before, and you may need to reprogram your opener’s travel limits and force settings. The technician will test the door multiple times and demonstrate the new operation. You will also receive guidance on maintenance for the converted system—lubricating the new tracks and springs regularly to ensure long life.

Ready to reclaim your garage’s ceiling space or park a taller vehicle? Contact Robert Garage Door Roller Replacement today to schedule a consultation for your Denver property. We will walk you through the options and provide a clear estimate specific to your garage’s layout.